PF 2-Phase & 4-Phase High Torque Stepper Motors

• Six leads for various wiring configurations

• Wide selection range to suit various applications

• Highly cost effective

PS 2-Phase & 4-Phase High-Performance Stepper Motors

• Six leads for various wiring configurations

• Wide selection range to suit various applications

• Highly cost effective

INS20 AC series 2-Phase NanoDrive™ Driver

• Up to 200,000ppr

• 100~120Vac Single Phase Power Input

• High resolutions selection

• Maintains maximum torque

• Up to 2.0A/phase output

IMS20 AC 2-Phase Stepping Motor Driver

• Constant current chopper, maximum 2A/phase

• Motor current shut off signal

• Clock input selection

• Auto current down function

• Low power consumption    

SD45-431 Hi-Torque Driver, AC Series, High Amp

• Amazing High-Torque and Power Performing Capabilities

• Constant Current Chopper Bi-Polar Driver

• Rated Current up to 4 Amps/Phase

• 115-120 V AC, 50-60 Hz Internal Power Supply

SD45-231 Hi-Torque Driver, AC Series, 2 Amp Version DISCONTINUED

Replaced by Nyden's newest Intelligent Drivers:

• IMS20 High Performance AC Driver

• INS20 High Performance AC Driver, 16 Nano-Speed Options

SD22-110 & SD45-610 Driver Series, AC Versions DISCONTINUED

Replaced by Nyden's newest Intelligent Drivers:

• IMS20 High Performance AC Driver

• INS20 High Performance AC Driver, 16 Nano-Speed Options

The ICD200 Series: An Innovative Compact Driver/Controller Unit

• Reaches an Absolute Nano-Positioning Step Rate of up to 20,000 Steps-per-revolution.

• Fully intelligent and addresses all levels of product functionalities in a cost effective and high-throughput modular unit.

• The Driver portion produces optimal micro-stepping resolutions, whereas the Motion Controller attached executes a string of commands upon user's selection.

• No connection to a PC required with this standalone system.
   

IMS201 DC series 2-Phase Stepping Motor Driver

• Adjustable Driving current up to 2.0 Amps/Phase

• High resolution of  1600 Steps/revolution

• Lightweight and Compact

• 24Vdc supply input

• Extremely low vibration & no hunting problems

• Maintains high torque

INS200 DC series 2-Phase NanoDrive™ Driver

• Up to 200,000ppr

• 24Vdc~36Vdc supply input

• Extremely low vibration & no hunting problems

• Maintains high torque

• Up to 2.0A/phase output

IMS200 DC 2-Phase Stepping Motor Driver

• High Revolutions (4 different settings)

• Low Vibration

• Maintain Maximum Torque

• Input Pulse Selection (Bi-Clock/Gate)

• DC 24V input

SND100 series 2-Phase NanoDrive™ Driver

• Up to 200,000ppr

• 24Vdc~36Vdc supply input

• Extremely low vibration & no hunting problems

• Maintains high torque

• Up to 2.0A/phase output

SD215 Bipolar Chopper Stepping Motor Driver

• Up to 1.2A per phase

• 12Vdc~36Vdc supply input

• 20KHz chopping rate

• Automatic current reduction in standby mode

• Stepping: 1/1(full), 1/2(half)

SD230 Bipolar Chopper Stepping Motor Driver

• Up to 3.0A per phase

• 12Vdc~50Vdc supply input

• 20KHz chopping rate

• Automatic current reduction in standby mode

• Stepping: 1/1(full), 1/2(half), 1/4(quarter), 1/8

PLG240 2-Phase/4-Phase Driver/Controller

• 150 complex instruction lines capacity

• 32 sets of motion parameters

• Emergency stop input

• Constant Speed movement or Indexed movement

• I/O Control | Timer | Loop control | Set Current

SD275: MicroStep 6-Amp Driver

• Accepts pulses and direction signals

• Generates up to 6 A of continuous current per phase.

• Resolution settings range from 200 steps-per-revolution at 1.8º to 10,000 steps-per-revolution at 0.036º

• Heat-sink chip provides thermal management.

UPS200 & UPS201 2-Phase Driver Series DISCONTINUED

• SND100 NanoDrive™ with 16 Resolution Modes up to 200,000 Steps/Revolution for Supreme Accuracy.
• IMS200 High Microstep Modes up to 1/8 Step Angle.
• INS200 NanoDrive™ with 16 Resolution Modes up to 200,000 Steps/Revolution for Supreme Accuracy. Maintains high torque while reaching optimal resolution.