PCE series 5-Phase Stepper Motors (CE approved)

• Five leads for easy wiring configurations

• Wide selection range to suit various applications

• Compact size for high Torque performance

• Highly cost effective

• CE Approved versions

PF series 5-Phase High Torque Stepper Motors

• Non-CE-Rated version of the PCE Series

• Five leads for easy wiring configurations

• Wide selection range to suit various applications

• Compact size for high Torque performance

• Highly cost effective

PS Series 5-Phase Stepper Motors DISCONTINUED

• Replaced with PCE Series & PF Series 5-Phase High Torque Stepper Motors

• PS Standard Series Motors, Nema Sizes 17, 23 and 34

• PS High Resolution Motors, Nema Sizes 17 and  23

• PS Brake Motors, Nema Sizes 23 and 34

• PS Standard Motors with Mounted High-Performance Ballgears

PCE 5-Phase Motor Series with Optimal Incremental Encoder, 500P/R

• Click on above link to view the exciting Video of our Encoder Feedback system performing in live action.

• Mycom’s own designed Encoders pre-mounted to our 5-Phase Step Motors provide customers optimal closed loop feedback.

• PCE5641-500EC

• PCE5661-500EC

• PCE5691-500EC

PCE 5-Phase Motor Series with Optimal Incremental Encoder and Dampener, 500 P/R

• Mycom’s own designed 5-Phase Step Motor Series pre-mounted with our own optimal Incremental Encoders and Dampeners provides customers superior closed loop feedback achievability and the smoothest running performance:

• MSM5641-C

• MSM5661-C

• MSM5691-C

INS50 AC 5-Phase NanoDrive Driver

• Nano Resolution up to 500,000 Steps-a-Revolution

• 16 Different Resolution Modes

• 100~120Vac / 200~220Vac Single Phase Power Input

• Opto-isolated inputs and outputs

• Achieves and maintains ultra high torque

Click here for a total understanding of Mycom's drivers and their operation with torque control

IMS50 AC 5-Phase Compact-Size Driver

• 100~120Vac or 200~220Vac Single Phase Power Input

• Opto-isolated inputs and outputs

• Auto-current down feature

• Half/ Full step setting

Click here for a total understanding of Mycom's drivers and their operation with torque control

IMS51 AC 5-Phase Compact-Size Driver

• 100~120Vac or 200~220Vac Single Phase Power Input

• Opto-isolated inputs and outputs

• Auto-current down feature

• Half/ Full step setting

UPS50, UPS51, UPS52, UPS53 and UPS54 Drivers, AC Series, Patented STAR Series DISCONTINUED

• Replaced with Enhanced Nano-Speed and High-Torque Versions Available by using Nyden’s Newest IMS50, IMS51, or INS50 NanoDrives™

NYDEN's Compact PSU50 5-Phase Series

• Star Bipolar, Constant Current Chopper Driver, 5-Phase System which offers Servo-like Performance

• Highly Economical

• 110VAC ± 10% Power Requirement

• 3.5 Amps Power Consumption

MLN50 Mechatrolink-II Communication Interface Stepping Motor & Driver System

• Nano Resolution up to 500,000 Steps per Revolution

• 16 different Resolution modes from 1 full step to 1/1000th step.

• Event output (hard output) is available at the time of designated pulse attainment.

• Closed loop is available with Encoder input.

• Advanced SSCNET II Bus Network Protocol

• High speed networking with very low Cycle Times

• AC100V ~ 115V ±10%  50/60 Hz

• Designed to Drive Mycom’s 5-Phase Nema-Sized Motors.

• The Advanced Technology of SSCNET: Simply “plug” the cable system in and start communicating.

• SSCNET cabling reduces installation and setup time for improved productivity and lower overall costs.

• High resolutions (16 different settings)
• Extremely low vibration and no Hunting Problems
• Maintain Maximum Torque
• Low power consumption

• Small size and economical unit
• 24-36Vdc supply input
• Star bipolar with selectable output current
• Half/ Full and Micro Step setting
• Auto-current down feature

• Small size and economical unit
• 24Vdc supply input
• Opto-isolated inputs and outputs
• Auto-current down feature
• Half/ Full Step setting

• Advanced drivers operate our CE-Rated line of 5-Phase Motors.
• Power source voltage DC24V.
• Rated output current 1.4A and 0.75A.
• High Resolution Achievable, up to 0.36˚.
• Compact Design and Simple Wirings.
• DIN rail refastening capability for enhanced performance.
• Automatic Current Down Mode for Energy Saving Achievability.

• Replaced with Enhanced Nano-Speed and High-Torque Versions Available by using Nyden’s Newest IMS500 or INS500 NanoDrives™.

• Advanced SSCNET II Bus Network Protocol
• High speed networking with very low Cycle Times
• Designed to Drive Mycom’s 5-Phase Nema-Sized Motors.
• The Advanced Technology of SSCNET: Simply “plug” the cable system in and start communicating.
• SSCNET cabling reduces installation and setup time for improved productivity and lower overall costs.