PLG200, 2 & 5 Phase Controller/Indexer
Characteristics
The PLG200 is a programmable, single axis stand-alone stepping motor controller that is easy and flexible to use. Both run speed and index distance can be programmed or adjusted by the operator through the binary switches. A simple motion task can be downloaded to the on board non-volatile memory. PLG200 is ideal for OEM applications such as conveyor, and indexed positioning systems.
Features
10K Maximum PPS; 5VDC Power
Adjustable digital speed selection (256 speeds).
Adjustable index distance (1 ~ 256 x Base Index Unit*).
Three (3) General Purpose Inputs; Two (2) General Purpose Outputs.
Pulse & Direction output to Interface with 5 or 2 phase stepping motor driver.
Compact size: 2.5 in. x 3 in.
Specifications: Electrical Ratings
|
Symbols |
Description |
minimum |
typical |
maximum |
units |
| Iout | Output port current |
0 |
150 |
mA |
|
| Testop | Hold time for emergency stop |
10 |
µs |
||
| Tin | Input hold time before it is accepted by controller |
Inputs are polled in different stages of command execution.* |
µs |
||
| Brate | Baud rate |
9600 |
9600 |
9600 |
|
| Tamb | ambient temperature |
0 |
+150 |
°C |
|
| Tstg | storage temperature |
0 |
70 |
°C |
|