PSU50

The PSU50 Series driver is a compact driver specially designed for applications where space is limited. Mycom's own IC made this design possible. In addition to the 20 percent reduction in size and weight, the PSU50's power efficiency is approximately 30 percent higher than the comparable UPS50 Series drivers.

These drivers are capable of driving a wide range of 5 Phase Star stepping motors. It can be matched with both the standard PS Series as well as the high torque, high speed PF Series motors. Please refer to torque graphs available for individual motors.

With the PSU50's built-in power supply, there is no need for an external power supply. This is excellent for industrial settings and will simplify the wiring requirements.

Model	PSU50-033	PSU50-133
Drive Type	Star Bi-Polar, Constant Current Chopper
Current Rating	0.75 A/Phase	1.4 A/Phase
Power Requirements	AC 100V/115V ± 10% 50/60Hz
Power Consumption	2.0A or less	3.5A or less
Input Pulse Type	Step and Direction (1P) or CW/CCW (2P) signal, selectable
Input Interface	All inputs are opto-isolated Voltage: L: 0~0.5V H:4~5V Series Resistance: 390W
Output Interface	Opto-isolated open collector output: 24Vdc 10mA nominal
Operating Environment Temperature	0 ~ 40°C Ambient temperature
Dielectric Strength	No abnormality detected after application of AC 1KV between case and power input terminals, case and signal I/O terminals, signal terminals and power input terminals for duration of one minute.
Insulation Resistance	100MW or better with 500V potential applied between case and power input terminals and signal I/O terminals.