NYDEN's UPS 52 PulStar V Series , High Torque Version Series

5-Phase, 5-Lead Stepping Motor and Driver Units

POWERFUL TORQUE, POWERFUL CONTROL, THE COMPLETE PACKAGE: High Performance 5-Phase Stepping Motor/Driver Packages. Available in Sizes 23 and 34.

Stand back and take note: NYDEN's PULSTAR V Series 5-Phase Motor & Driver set meets and exceeds every design engineer's requirement for an affordable, ultra high-torque and superior-performing Motion Control design package. Industries in which our PULSTAR V systems have been triumphantly implemented: SEMICONDUCTOR, PACKAGING, MEDICAL, ROBOTICS, INDUSTRIAL/LIGHT MANUFACTURING, GOVERNMENTS R&D and more. For over ten years, NYDEN has been delivering the finest and most affordable Motion Control Systems & Solutions to guide the direction of your most crucial design requirement. Give us a call and embark on the Motion Control technical fundaments to smart design engineering, powered to the fullest degree by NYDEN USA.   
Very High Torque in a Compact Package.
High Resolution.
-- 0.72°/Full Step (500 step/rev)
-- 0.36°/Half Step (1000 step/rev)
Extremely smooth operation.
-- Virtually no low rpm resonance.
Motor and Driver are matched pair..
-- No current adjustments needed.
Unit includes Motor & Driver with Built-in Power Supply.
Highly cost-effective.

 

UPS 52 Series, PULSTAR V High Torque Series 5-Phase Motor & Driver Set.
(A) after the Part Number denotes single shaft (Front shaft only) motor configuration.
(B) after the Part Number denotes thru shaft (Front & Rear shaft) motor configuration.

Motor Size(mm)

Motor and Driver Combination Part Number

Max. Holding Torque: oz-in (kg-cm)

Rotor Inertia oz-in2 (g-cm2)

Step Angle Full/Half

Phase Current (A)

Motor Weight: oz (kg)

Driver Part Number

Motor Part Number
Metric 23(60)
UPS52-564A(B)
UPS52-566A(B)
UPS52-569A(B)
58.3(4.20)
115.3(8.30)
230.5(16.60)
0.87(175)
1.40(280)
2.80(560)
0.72°/0.36°
0.72°/0.36°
0.72°/0.36°
1.40
1.40
1.40
17.60(0.50)
26.40(0.75)
45.80(1.30)
UPS52-131
UPS52-131
UPS52-131
PF564A(B)
PF566A(B)
PF569A(B)
Metric 34(85)
UPS52-596A(B)
UPS52-599A(B)
UPS52-5913A(B)
291.6(20.9)
568.0(40.9)
873.5(62.9)
7.00(1400)
13.50(2700)
20.00(4000)
0.72°/0.36°
0.72°/0.36°
0.72°/0.36°
1.40
1.40
1.40
52.90(1.50)
88.20(2.50)
123.4(3.50)
UPS52-131
UPS52-131
UPS52-131
PF596A(B)
PF599A(B)
PF5913A(B)

 

Motor Specification

  

Driver Specification
  *see above Motor(s)     UPS52-131
Accuracy ± 3 min.   Output Current 1.4 A per Phase Max.
Shaft Radial Play 0.025 mm. max. / 0.5 Kg load   Driver Type Star Bi-Polar , Constant Current Chopper
Shaft Axial Play 0.075 mm. max. / 1.0.Kg load   Power Requirements 90 - 121 VAC , 50/60 Hz
Dielectric Strength No abnormality detected after the application of 0.5KV at 50 Hz between motor windings and frame for duration of one minute.   Power Consumption 4.0 A or less
Insulation Class Class B   Built in Functions Auto Current Down at stand still. Current OFF. Monitor Timing Output signal. Driver Overheat warning signal output.
Insulation Resistance 100 ohms or better with 500V potential applied between motor windings and frame at normal ambient temperature and humidity.   Input Pulse Type Step & Direction or Bi-Clock (CW/CCCW) pulses (Selectable). All Opto-Isolated . Voltage H=4.5 to 5V , L = 0 to 0.5V , Resistance = 220 ohms.
Operating Environment Temperature 0 ° C to +50 ° C   Dielectric Strength No abnormality detected after the application of AC 1 KV between case and power input terminals, case and signal I/O terminals, signal I/O terminals and power input terminals for duration of one minute.
      Insulation Resistance 100 M ohms or better with 500V potential applied between case and power input terminals and signal I/ O terminals.
      Operating Environment Temperature 0 ° C to +40 ° C