|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
Stepper Motor Motion Control Instruments |
|
Cycloidal Ball Reducers |
|
 |
-
In-line style saves space
-
Over 1,389 oz-in running
torque at 60 rpm and above
-
Up to 20,000 steps of
true resolution
-
High cost effective
|
|
|
Optical Incremental Shaft Encoders |
|
 |
- Designed to easily mount to an existing step
motor shaft of variable sizes.
- Internal monolithic electronic module converts
real-time shaft angle, speed and direction into TTL-compatible
outputs.
- Phase A, B and Z open collector or line receiver
output available
- Optimal frequency response
- Rugged Screw and steel housing. Extremely low
cost.
|
|
|
Viscous Inertial Dampers |
|
 |
- Designed to easily mount to an existing step
motor shaft of variable NEMA Sizes
- Greatly Suppresses Motor Vibration.
- Excellent Vibration Consumption and
Absorption.
- Advanced for Clean Room Environments.
- Made of silicon gel encased in a compact,
airtight package.
- Designed to absorb oscillation energy; and
shortens settling time.
- Designed with heat-resistant material for
longwearing operational life.
|
|
|
MPG1010 Single Axis
Pulse Generator Chip, Ultra High Speed
DISCONTINUED |
|
 |
- LSI type peripheral circuit
- Single Axis Chip to Control the Motion of Stepping or Digital Input Servo Motors
- Capable of modify the Acceleration and
Deceleration rates
- Reaches Trapezoidal , Triangular and Velocity
profiles for Point to Point applications.
- Ultra High Speed Pulse Rate output up to 8.0 Mhz.
|
|
|
MPG1020 Two Axis
Pulse Generator Chip, Ultra High Speed |
|
 |
- Performs Trapezoidal , Triangular and Velocity movement profiles.
- DSP type peripheral circuit with built-in functions.
- For 2 Axes Stepping motors or Digital Input Servo motors.
- Address and Data commands sent directly to Chip.
- Allows system designer the flexibility of composing
Trapezoidal , Triangular well as Velocity movement profiles
for Open loop applications.
|
|
|
LSI MPG2031
pulse-generator chip |
|
 |
- 1/4 the size of a conventional chip and operates two
axes of motion control for steppers and digital servos.
- Address and data commands can be sent to the chip,
allowing a system designer to compose an S-curve,
trapezoidal, or other complex move profiles for linear or
circular interpolation positioning.
- Packaging is 100-pin QFT with a 0.5-mm lead pitch for
surface-mount applications.
- Matching 2- and 5-phase steppers and drivers are also
available.
|
|
|
MPG2011
Pulse Generator Chip Series |
|
 |
- Ultra High Speed, Two Axis Pulse Generator Chip.
- Executes Trapezoidal , Triangular as well as Velocity
movement profiles.
- Designed for Steppers and Digital Input Servos.
- Starting point for Deceleration can be calculated
automatically.
|
|
| DMP1040 and DMP2042 Chip Series |
|
 |
Click here
for
DMP1040 Manual
- Highly advanced QFP Chip for an eclectic variety of
Design Protocols.
- Ultra compact at 0.5mm.
- Specific built-in functions for various Motion Control
applications.
- Ultra Fine Pulse Rate output.
|
|
|
PULMORE EC series |
|
 |
-
Optimal Motorized cylinder for a variety of design
applications.
-
Multiple positions.
-
Space saving design capability.
-
High resolution up to 0.005mm
|
|
RV-500 5-Axes Robot
 |
|
|
- Simple-to-operate 5-Axes Robot
- Small size and light weight (13Kg)
- Arm length of up to 275mm
- Load capacity up to 300g
|
|
|
PMS20 and
PMS26 Automated Actuator Movement Series |
|
 |
- Advanced Automated Stage System for linear and
multi-directional applications.
- Simple hookup and wiring for operating 1-Axis or
additional modes to operate multi-Axes.
- Extremely lightweight and compact.
- Ultra-smooth precision movements executed by simple
programming.
|
|
|
MR-300-A06 and MR-300 DS Series: Advanced Laser System |
|
 |
- Click above for Video Demonstration (Windows Media
Player).
- Fine-Pitch laser movement achieves optimal resolution
with virtually no vibration.
- Each movement of axis speed reaches 0.1 to 300
mm/second.
- High-Technology exclusively incorporates Mycom’s
patented NanoDrive™ stepper to reach a nano-positioning
speed of up to 500,000 Steps/Rev.
- Ideal for a variety of laser marking or related
applications.
|
|
|
2-Channel Multi-Output Power Supply |
|
 |
- 120 VAC; 5V / 24V Output Voltage
- Conforms with ULS and CSA Standard
- Surface mounting as well as bottom and side
mounting availability
- Depth dimensions combined with installation
dimension
- Bolt-on Mounting
|
|
|
|
Menu
