MNC-100



Features

  • Simple control by direct position entry
  • LCD Display with simple key entry
  • Pre-stored up to 15 Positions
  • Individual speed selection for each position possible
  • Up to 10 different pre-set speed setting
  • External trigger single axis controller
  • Each pre-stored position can be selected individually
  • Automatic sequential position start possible
  • Built-in Home Function available
  • External Emergency Stop available


Specifications

Items Descriptions
Control System Microprocessor control system (Z80 compatible)
Pulse Output Controlled by MYCOM's pulse generator LSI, MPG1020
Number of Axis One axis.
Controlled motors Stepping motor
Program Capacity Position data: 15 positions. (Position stored in Serial EEPROM)
Acceleration/Deceleration Trapezoidal or triangular
Command System Key Input, Remote start signal (Sequential start / Specific position start)
Moving Distance command system Absolute Specification
Remote Function Home search, Scanning, Position Data moving, Emergency stop, Current position clear
Panel Control Home search, Scanning, Index moving, Position data moving, Position data editing,
Position data storing, Speed setting
Start Speed and Maximum Speed 1 to 65,533 Hz
Acceleration/Deceleration Speed 1 to 1,900 Hz/msec
Setting range of Moving distance Available moving range setting (0 to ± 8,000,000)
Setting range of Moving command 0 to ± 8,000,000
Driver Interface Output for clock (Open collector)
1 clock (Gate control)
2 clocks (Bi-clock or CW/CCW control)
Mechanical Sensor Interface Both ends over-run limits
Home sensor
Exclusive Input/Output Input: 8 points
Photo-coupler isolated
5mA internal power source (+24V) used
External start signal (H_ST, S_ST, P_ST)
Emergency Stop signal (EMER)
Specific position signal (D0 to D3)
Output: 3 points
Photo-coupler isolated
Open collector output, 13mA, less than dielectric strength 35V
Error Output(ERR), Ready output(RDY), Moving Output(MOVE)
Display LCD display, 16 characters x 2 lines
Parameter System Setting, Data clear
Input Power DC +24V ± 10%, less than 0.15Amp
Temperature Operation temperature: 0 ~ 45° C, Humidity: 30 ~ 80%.
Storage temperature: 0 ~ 60° C, Humidity: 20 ~ 90%.
Dimension 101(W) x 98(D) x 40.6(H) mm
Weight 500g

--Click here for manual--

Copyright © 2005 Nyden.com All Rights Reserved.