|
MLH20-1030 PCI-Bus Mechatrolink Interface
Controller Card |
Characteristics
- Maximum of 30 channels for optimum flexibility and design
achievability
- MECHATROLINK II ensures simple correspondence of equipment design
and programming control
- One Controller board controls most Advanced equipment.
- Capable of controlling a variety of Stepper Motors or Servo Motors
- No complicated wirings are necessary
- Management of a complete link of MECHATROLINK programming group and
equipment is possible within the simple execution of motion parameters
and programs.
* Recommended by the Yaskawa Corporation
in FA machinery for its high-speed field network.
System Configuration Figure
Specifications
| Items |
Descriptions |
| Bus Type |
PCI-Bus |
| Communication
method |
based on
MECHATROLINK II |
| Control System |
MECHATROLINK I / II corresponding equipment |
| Control Channel |
Maximum
of 30 channel |
|
Output Interface |
MECHATROLINK II communication port |
1ch |
|
Input (2 points): starting and emergency stop |
Input
circuit: Photo coupler input |
| Control
capacity: Below max 10mA, external input power source 24V |
|
Output (1 points) RDY |
Output
circuit: Photo coupler output |
| Control
capacity: Below largest 10mA, external input power source 24V |
| PC
side I/O space |
Memory space |
PCI configurable
base address .It possesses 256 bytes (100H) |
| I/O space |
PCI configurable
base address .It possesses 4 bytes (04H) |
| Interruption I/F |
IRQ which is
allotted by PCI, one use |
|
Power source |
Bus logic
power source |
Below DC+5V±5% 1.0A |
| The power source for
sensor I/F |
DC+24V (from outside
supply) below 0.1A |
| Base plate
external size |
64.0mm
(H) ## 120.0mm (W) ## 20.0mm (D)
profile |
| Mass |
55g |
--Click here for manual--
|
Menu
